Rewritten event system to remove all macros, to make user code clearer.

Fixed incorrect ENDPOINT_EPNUM_MASK mask preventing endpoints above EP3 from being selected (thanks to Jonathan Oakley).

Removed STREAM_CALLBACK() macro - callbacks now use regular function definitions to clarify user code.

Removed DESCRIPTOR_COMPARATOR() macro - comparators should now use regular function definitions to clarify user code.

Demos/Device/RNDISEthernet/RNDISEthernet.c

@@ -83,7 +83,7 @@ int main(void)
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
  *  starts the library USB task to begin the enumeration and USB management process.
  */
-EVENT_HANDLER(USB_Connect)
+void EVENT_USB_Connect(void)
 {
 	/* Start USB management task */
 	Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);
@@ -95,7 +95,7 @@ EVENT_HANDLER(USB_Connect)
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
  *  the status LEDs and stops all the relevant tasks.
  */
-EVENT_HANDLER(USB_Disconnect)
+void EVENT_USB_Disconnect(void)
 {
 	/* Stop running TCP/IP and USB management tasks */
 	Scheduler_SetTaskMode(RNDIS_Task, TASK_STOP);
@@ -110,7 +110,7 @@ EVENT_HANDLER(USB_Disconnect)
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
  *  of the USB device after enumeration, and configures the RNDIS device endpoints and starts the relevant tasks.
  */
-EVENT_HANDLER(USB_ConfigurationChanged)
+void EVENT_USB_ConfigurationChanged(void)
 {
 	/* Setup CDC Notification, Rx and Tx Endpoints */
 	Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK,
@@ -138,7 +138,7 @@ EVENT_HANDLER(USB_ConfigurationChanged)
  *  control requests that are not handled internally by the USB library (including the RNDIS control commands,
  *  which set up the USB RNDIS network adapter), so that they can be handled appropriately for the application.
  */
-EVENT_HANDLER(USB_UnhandledControlPacket)
+void EVENT_USB_UnhandledControlPacket(void)
 {
 	/* Process RNDIS class commands */
 	switch (USB_ControlRequest.bRequest)

Demos/Device/RNDISEthernet/RNDISEthernet.h

@@ -60,19 +60,6 @@
 	/* Macros: */
 		/** Notification value to indicate that a frame is ready to be read by the host. */
 		#define NOTIF_RESPONSE_AVAILABLE                 0x01
-		
-	/* Event Handlers: */
-		/** Indicates that this module will catch the USB_Connect event when thrown by the library. */
-		HANDLES_EVENT(USB_Connect);
-
-		/** Indicates that this module will catch the USB_Disconnect event when thrown by the library. */
-		HANDLES_EVENT(USB_Disconnect);
-
-		/** Indicates that this module will catch the USB_ConfigurationChanged event when thrown by the library. */
-		HANDLES_EVENT(USB_ConfigurationChanged);
-
-		/** Indicates that this module will catch the USB_UnhandledControlPacket event when thrown by the library. */
-		HANDLES_EVENT(USB_UnhandledControlPacket);
 
 	/* Type Defines: */
 		/** Type define for a RNDIS notification message, for transmission to the RNDIS host via the notification
@@ -102,6 +89,11 @@
 		TASK(Ethernet_Task);
 
 	/* Function Prototypes: */
+		void EVENT_USB_Connect(void);
+		void EVENT_USB_Disconnect(void);
+		void EVENT_USB_ConfigurationChanged(void);
+		void EVENT_USB_UnhandledControlPacket(void);
+
 		void UpdateStatus(uint8_t CurrentStatus);
 	
 #endif

Demos/Device/RNDISEthernet/makefile

@@ -518,7 +518,7 @@ sizeafter:
 checkhooks: build
 	@echo
 	@echo ------- Unhooked LUFA Events -------
-	@$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \
+	@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
 	           cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
 			   echo "(None)"
 	@echo ------------------------------------