diff --git a/keyboards/stuple_networks/pico_3x3/keyboard.json b/keyboards/stuple_networks/pico_3x3/keyboard.json new file mode 100644 index 00000000000..42dc775bb06 --- /dev/null +++ b/keyboards/stuple_networks/pico_3x3/keyboard.json @@ -0,0 +1,39 @@ +{ + "keyboard_name": "Pico 3x3 Macropad", + "manufacturer": "Stuple Networks", + "maintainer": "Mitsuba100", + "bootloader": "rp2040", + "processor": "RP2040", + "features": { + "extrakey": true, + "bootmagic": true + }, + "matrix_pins": { + "rows": ["GP6", "GP7", "GP8"], + "cols": ["GP2", "GP3", "GP4"] + }, + "usb": { + "vid": "0x1209", + "pid": "0x3739", + "device_version": "0.0.1" + }, + "diode_direction": "COL2ROW", + "community_layouts": ["ortho_3x3"], + "layouts": { + "LAYOUT_ortho_3x3": { + "layout": [ + { "matrix": [0, 0], "x": 0, "y": 0 }, + { "matrix": [0, 1], "x": 1, "y": 0 }, + { "matrix": [0, 2], "x": 2, "y": 0 }, + + { "matrix": [1, 0], "x": 0, "y": 1 }, + { "matrix": [1, 1], "x": 1, "y": 1 }, + { "matrix": [1, 2], "x": 2, "y": 1 }, + + { "matrix": [2, 0], "x": 0, "y": 2 }, + { "matrix": [2, 1], "x": 1, "y": 2 }, + { "matrix": [2, 2], "x": 2, "y": 2 } + ] + } + } +} diff --git a/keyboards/stuple_networks/pico_3x3/keymaps/default/keymap.c b/keyboards/stuple_networks/pico_3x3/keymaps/default/keymap.c new file mode 100644 index 00000000000..a3a16e60622 --- /dev/null +++ b/keyboards/stuple_networks/pico_3x3/keymaps/default/keymap.c @@ -0,0 +1,12 @@ +// Copyright 2026 Stuple Networks +// SPDX-License-Identifier: MIT License + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ortho_3x3( + KC_1, KC_2, KC_3, + KC_4, KC_5, KC_6, + KC_7, KC_8, KC_9 + ) +}; diff --git a/keyboards/stuple_networks/pico_3x3/readme.md b/keyboards/stuple_networks/pico_3x3/readme.md new file mode 100644 index 00000000000..14f0ce639eb --- /dev/null +++ b/keyboards/stuple_networks/pico_3x3/readme.md @@ -0,0 +1,26 @@ +# Pico 3x3 Macropad + +A custom 3x3 macropad using the Raspberry Pi Pico (RP2040). + +- Keyboard Maintainer: [Mitsuba100](https://github.com/Mitsuba100/) +- Hardware Supported: Pico-3x3 rev1 +- Hardware Availability: [PCB](https://github.com/Stuple-Networks/Pico-3x3/tree/main/PCB) [Rasberry Pi Pico](https://www.raspberrypi.com/products/raspberry-pi-pico/) + +Make example for this keyboard (after setting up your build environment): + + qmk compile -kb stuple_networks/pico_3x3 -km default + +Flashing example for this keyboard: + + qmk flash -kb stuple_networks/pico_3x3 -km default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. + + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available