Deploying to gh-pages from @ qmk/qmk_firmware@0a3f7e4869 🚀

flashing.md

@@ -358,3 +358,46 @@ CLI Flashing sequence:
 2. Wait for the OS to detect the device
 3. Flash via QMK CLI eg. `qmk flash --keyboard handwired/onekey/blackpill_f411_tinyuf2 --keymap default`
 4. Wait for the keyboard to become available
+
+### `make` Targets
+
+* `:uf2-split-left` and `:uf2-split-right`: Flashes the firmware but also sets the handedness setting in EEPROM by generating a side specific firmware.
+
+## Raspberry Pi RP2040 UF2
+
+The `rules.mk` setting for this bootloader is `rp2040`, and can be specified at the keymap or user level.
+
+To ensure compatibility with the rp2040 bootloader, make sure this block is present in your `rules.mk`:
+
+```make
+# Bootloader selection
+BOOTLOADER = rp2040
+```
+
+Compatible flashers:
+
+* Any application able to copy a file from one place to another, such as _macOS Finder_ or _Windows Explorer_.
+
+Flashing sequence:
+
+1. Enter the bootloader using any of the following methods:
+    * Tap the `QK_BOOTLOADER` keycode
+    * Hold the `BOOTSEL` button on the PCB while plugin in the usb cable.
+    * Double-tap the `RESET` button on the PCB<sup>1</sup>.
+2. Wait for the OS to detect the device
+3. Copy the .uf2 file to the new USB disk
+4. Wait for the keyboard to become available
+
+or
+
+CLI Flashing sequence:
+
+1. Enter the bootloader using any of the following methods:
+    * Tap the `QK_BOOTLOADER` keycode
+    * Hold the `BOOTSEL` button on the PCB while plugin in the usb cable.
+    * Double-tap the `RESET` button on the PCB<sup>1</sup>.
+2. Wait for the OS to detect the device
+3. Flash via QMK CLI eg. `qmk flash --keyboard handwired/onekey/rpi_pico --keymap default`
+4. Wait for the keyboard to become available
+
+<sup>1</sup>: This works only if QMK was compiled with `RP2040_BOOTLOADER_DOUBLE_TAP_RESET` defined.