mirror of
https://github.com/qmk/qmk_firmware.git
synced 2026-09-30 22:09:01 +02:00
32 lines
1.2 KiB
Markdown
32 lines
1.2 KiB
Markdown
# MID.1
|
|
|
|
|
|
|
|
## Description
|
|
|
|
A 40% keyboard with a staggered 4x12 layout and hotswap PCB.
|
|
|
|
* Keyboard Maintainer: [Sean O'Neill](https://github.com/oneillseanm)
|
|
* Hardware Supported: MID.1
|
|
* Hardware Availability: [MID.1 product page](https://www.aokay.cool/mid-1)
|
|
|
|
## Setup
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make aokay/mid1:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make aokay/mid1:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in three ways:
|
|
|
|
* **Bootmagic reset**: Hold down `Esc` and plug in the keyboard. `Esc` is assigned to the top left key in the default keymap.
|
|
* **Keycode in layout**: Press `Fn+ESC` for `QK_BOOT`. `Fn` is assigned to the key to the right of the spacebar/split spacebar in the default keymap.
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB, accessible through the bottom case.
|