mirror of
https://github.com/qmk/qmk_firmware.git
synced 2026-10-01 22:40:11 +02:00
36 lines
1.7 KiB
Markdown
36 lines
1.7 KiB
Markdown
# dj505/picolx
|
|
|
|
|
|
|
|
PicoLX: A compact keyboard-style controller for the *Pump It Up* rhythm game series. This firmware is intended for using the controller with the [Pump It Up Rise](https://store.steampowered.com/app/2756930/PUMP_IT_UP_RISE/) home version of the game.
|
|
|
|
* Hardware Supported: [PicoLX](https://github.com/dj505/PicoLX)
|
|
* Keyboard Maintainer: [jjc1138](https://github.com/jjc1138)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make dj505/picolx:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make dj505/picolx:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Keymaps
|
|
|
|
There are four keymaps provided.
|
|
|
|
* [default](keymaps/default/readme.md)
|
|
* [menumode](keymaps/menumode/readme.md)
|
|
* [allinone](keymaps/allinone/readme.md)
|
|
* [rgbmode](keymaps/rgbmode/readme.md)
|
|
|
|
### Bootloader
|
|
|
|
Put the controller in bootloader mode in one of three ways:
|
|
|
|
* **Physical reset button**: Hold down the BOOTSEL button on the underside of the PCB (by poking something through the hole on the bottom of the case) when connecting the USB cable.
|
|
* **Bootmagic reset**: If a version of this firmware is already installed, hold down the top-left button on the keyboard when connecting the USB cable.
|
|
* **Keycode in keymap**: If a version of this firmware is already installed with the 'menumode', 'rgbmode', or 'allinone' keymap, hold down the Service button and press the Test button. Or press a button mapped to `QK_BOOT` in your own keymap.
|