mirror of
https://github.com/qmk/qmk_firmware.git
synced 2026-09-30 13:58:57 +02:00
Harry CuttsandJoel Challis
7a15cd2482
* Add "handwired" TwentyPad macro pad TwentyPad is 20-key macro pad I created as a hobby project. Its configuration is based on ez_maker/directpins/teensy_2, with the bootloader and layout changed. * Host the image on Imgur Co-authored-by: Joel Challis <git@zvecr.com> --------- Co-authored-by: Joel Challis <git@zvecr.com>
27 lines
1.1 KiB
Markdown
27 lines
1.1 KiB
Markdown
# TwentyPad
|
|
|
|
|
|
|
|
A simple twenty-key macro pad, built to learn PCB design.
|
|
|
|
* Keyboard Maintainer: [Harry Cutts](https://github.com/HarryCutts)
|
|
* Hardware Supported: ATMEGA32U4 on a [custom PCB](https://github.com/HarryCutts/twentypad/)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
qmk compile -kb handwired/twentypad -km default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
qmk flash -kb handwired/twentypad -km default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard
|
|
* **Physical reset button**: Press the button marked `SWR1` in the top-left of the PCB
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|