mirror of
https://github.com/qmk/qmk_firmware.git
synced 2026-10-24 01:43:10 +02:00
26 lines
1.1 KiB
Markdown
26 lines
1.1 KiB
Markdown
# Yoda Distro
|
|
|
|
|
|
|
|
Scratch made direct wire pin 8-Key (4x2) Macro Pad using a Raspberry Pi Pico (2040).
|
|
|
|
* Keyboard Maintainer: [YodaDistro](https://github.com/YodaDistro)
|
|
* Hardware Supported: Raspberry Pi Pico (2040)
|
|
* Hardware Availability: 3D Printed Design (https://github.com/YodaDistro/MacroPad)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make handwired/yodadistro/macro:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make handwired/yodadistro/macro:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs)
|
|
|
|
## Bootloader
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|