mirror of
https://github.com/qmk/qmk_firmware.git
synced 2026-09-30 13:58:57 +02:00
2a5dd4317a
* Initial commit orbiter Left side support. Need to look into split support next. * Start adding split configurations * Not really working but it compiles * WORKING CONFIG * Add via support remove via json file later * added oled driver and i2c configuration * update to correct driver block macros * fix faulty configuration for i2c * remove via support * enable console by default * rework layout slightly * fix default keymap * cleanup * fix comment * update readme * add copyright headers to pass lint check * apply clang-formatter * refactor folder structure slightly * quickfix name * bump readme * rework for data driven conf * apply formatter json and update naming * forgot one * slight adjustment * use smaller copyright * minor change to name * Apply suggestions from code review Co-authored-by: Joel Challis <git@zvecr.com> * remove .mk file and rename oled.c * apply formatter * git-format text * Use DMA offloading * add dma config * remove lto * Update keyboards/supercrisp/orbiter/readme.md Co-authored-by: Joel Challis <git@zvecr.com> --------- Co-authored-by: rasmus <rasmus_lindy@hotmail.com> Co-authored-by: Joel Challis <git@zvecr.com>
28 lines
1.1 KiB
Markdown
28 lines
1.1 KiB
Markdown
# Orbiter Wired
|
|
|
|
A 52-key split keyboard.
|
|
|
|
|
|
|
|
* Keyboard Maintainer: [Karl Stralman](https://github.com/kjeller)
|
|
* Hardware Supported: Orbiter v1.00
|
|
* Hardware Availability: [Github KiCad project](https://github.com/kjeller/orbiter_keyboard/tree/master/pcb/orbiter-wired)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make supercrisp/orbiter:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make supercrisp/orbiter:default:flash
|
|
|
|
See the [build environment setup](getting_started_build_tools) and the [make instructions](getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|