mirror of
https://github.com/qmk/qmk_firmware.git
synced 2026-09-07 10:53:17 +02:00
30 lines
1.4 KiB
Markdown
30 lines
1.4 KiB
Markdown
# mithril
|
|
|
|
|
|
|
|
*A custom split ortholinear keyboard (4x6 + 3 thumb keys per half) with per-key RGB.*
|
|
|
|
* Keyboard Maintainer: [Javier San Félix Guajardo](https://github.com/sanfeps)
|
|
* Hardware Supported: Mithril rev1 PCB, ATmega32U4 (Caterina bootloader), split halves with serial sync
|
|
* Hardware Availability: PCB design, plate files and case at [github.com/sanfeps/mithril_kb](https://github.com/sanfeps/mithril_kb)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make mithril/rev1:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make mithril/rev1:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**:
|
|
* **Left half**: hold down `Esc` (matrix position `0,0` — top-outer key) and plug in the keyboard.
|
|
* **Right half**: hold down the top-outer key (`?` on the base layer, matrix position `5,0`) and plug in the keyboard.
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available (mapped to the bottom-right key on layer 2 of the default keymap)
|